| Product Name | Food Grade Tube Heat Exchanger Stainless Steel SS304 316L Cooling System Spiral Wound Tube Heat Exchanger | |
| Plate Material | SS304 or 316L | |
| Body Material | SS304 | |
| Sealing Material | EPDM,SILICONE,NBR,PTFE,FKM | |
| Max Pressure | 3bar | |
| Size | Sea Below Sheet | |
| Cooling | Single Stage or Two Stage | |
| Working Temperature | -10℃ ~ 150℃ | |
| Seal Temperature | EPDM | -40℃ ~ 135℃ |
| FKM | -30℃ ~ 230℃ | |
| SILICONE | -40℃ ~ 180℃ | |
| NBR | -40℃ ~ 120℃ | |
| Brand | KingGo | |
| Application | Dairy, Food, Beer, Beverage, Pharmacy, Cosmetic, Water , Etc | |
| Service | Product Service | ODM, OEM,Customized according to drawing |
| Material certificate,Inspection certificate | ||
| After-sales Service | Network Support, Return And Exchange | |
| Engineer one-on-one tutoring | ||
| Packing | Carton Box , Plywood Case, Protective Packaging | |
| Shipment | By express,by air or by sea,as customer request | |
| Delivery Detail | Usually 10-15days after order confirmed | |
| Model Number | Max.LC(mm) | Heat Exchane Area | Length | Max.Flow(T/H) | Max. Plate Quantity | Connect Size (mm) |
| BR-0.15 | 1200 | 0.15 | 2.0+x | 36 | 250 | 50 |
| BR-0.25 | 1600 | 0.25 | 2.55+X | 140 | 278 | 100 |
| BR-0.65 | 3000 | 0.65 | 2.5+X | 360 | 600 | 150 |
| BR-0.85 | 3000 | 0.85 | 3.8+X | 600 | 270 | 200 |
| BR-1.54 | 2340 | 1.54 | 3.5+X | 750 | 300 | 250 |
| BR-1.8 | 3600 | 1.8 | 3.5+X | 997 | 300 | 350 |
Features
316L Spiral wound tube heat exchanger
1. High heat transfer coefficient of spiral wound tube heat exchanger: At present, the heat transfer coefficient is high in the steam-water heat exchange conditions.
316L Spiral wound tube heat exchanger
2. Spiral-wound tube heat exchanger is not easy to foul: Because the opening center on the same head is at a 90° angle, all the heat exchangers participate in heat exchange, and there is no dead zone; the special double-ribbed tube bundle drives the spiral flow of the fluid, resulting in Turbulent flow effect, the fluid has a strong scouring effect on the pipe wall under the action of centrifugal force, so it is not easy to scale and saves maintenance costs in the later period.
316L Spiral wound tube heat exchanger
3. Spiral-wound tube heat exchanger is not easy to leak: automatic welding technology, the weld joint is tightly combined, firm, and the sealing cycle is long. Not easy to leak.
316L Spiral wound tube heat exchanger
4. Spiral wound tube heat exchanger occupies a small area: large heat transfer area per unit volume (about 1.4 times of bare tube heat exchanger, 1.5 times of spiral plate heat exchanger, 1.7 times of heat transfer of bellows, floating 2.5 times that of the disk heat exchanger), the total heat transfer coefficient is high, the area is small, and the capital construction cost is saved.
316L Spiral wound tube heat exchanger
5. Spiral wound tube heat exchanger is easy to install: there are two forms of vertical and horizontal for easy installation under different working conditions; small size, no need to use a large crane to operate, manual installation can be done.
Post time: Apr-20-2023